[LAGUN] Replacement Bushings (Pair)

Details & Specifications for BUSHINGS (Pair)

BUSHINGS:

• Sold as a pair
• Each bushing is installed on opposite sides of the arm 
  • When assembling the system, the washer part of the bushing should always face towards the taps of the table mounting plate and the leg.

The original bushings are pressed in by machine at the factory & are not the easiest to replace by hand.  We strongly encourage purchasing a new arm with bushings already installed.  CLICK HERE TO PURCHASE ARM.

Replacing bushings by hand is not the easiest task and some tools (not included) are required, such as hammer, pliers, etc.  Here are some tips:

1. Remove old bushing (may need to crack the bushing first)
2. Line up the line on the washer part of the bushing with the cut in the arm
3. With a board on top of the bushing, firmly yet carefully tap the board to install the bushing, making sure that the bushing is going in straight.  This will be a snug fit and the outer edge of the bushings will shred.

CAUTION!!  The "Original Lagun" parts are NOT compatible with the knockoff systems.